"An Old-Time Model Shop" - Founded 1961


    
837 West Main Street
Lansdale, PA 19446
(215) 855-1268
(215) 368-0770
FAX:(215) 855-3976
PVHC
  Home
  About

Collectables Specials & Discontinued items
  Items for sale

Rubber / Free Flight
  Aircraft
  Finishing Supplies

Control Line
  Aircraft
  Finishing Supplies

Engines/Motors
   Glow
   Gas
   Electric 

 

EMPS Motors
02/04/08

Have we got a motor for you!! The MM1. It operates on 1 to 4 cells.
Weighs a mere 1.25oz. Uses 110 mah and larger cells. This little beauty develops 0.74oz of thrust with 1 cell and 4.70 oz with 4!
Is this thing great or what?
That means it'll fly anything from about 100 sq. in. to 640 sq. in.!
(Well theoretically, anyway) Instructions and data, are included.

Item # MM1 $3 

MGK- This is a 4.8:1 geared kit. It permits you to swing a 7" prop for FF, R/C and Retrieval Systems up to one pound. (12 0z. for pure R/C). A maximum of 7 cells. The Kit has motor,  pre cut hardware, prop, Instructions and Data. This is the one everyone is buying. Out of Stock

Item # MGK $13.95 

MG-1 This kit allows you to use some of your K&S and Dubro hardware that you may have laying around. You receive only the motor and gears.You supply the hardware. There is a hardware parts list, data and instructions telling you the sizes to cut your
hardware to make a MGK unit.

Item # MG-1 $6.00 

Gear set only for MGK unit.
(1 ea. 10 tooth and 48 tooth gear)

Item # MGG per set $4.00 

Modified Pearce Timer - An electronic motor timer for small stuff; weighs 0.12 oz! Handles 4 Amps without a heat sink; 15 Amps with. Motor run time may be varied from 15 seconds to 2 1/2 minutes via a simple screwdriver adjustment. Operates on 1 to 6 cells. You can "peak" charge your pack for optimum performance without "fly-away" worries! Uses non-Radio Shack parts, but you get all 6 of them and the very simple assembly instructions.
 OUT of STOCK

Modified Pearce Timer  $10.00  

Shipping for above items $6.00  48 States
 Foreign Buyers, Cost Plus $2.00 Handling

If you order Only Small Parts Below
 Shipping will be adjusted to $3.50 when billed.  

SMALL REPLACEMENT PARTS

Shaft 3/32" Dia. X 2.25" $2.00
VE Prop 7.25" x 4.5" OUT OF STOCK $1.75
Gear Sets 10T & 48T; 48P $4.00
Housing 1/8" Dia x 1-3/32" $1.00
Spacer 5/32" Sq. x 1-3/32"  $1.00
2 #4-40 Nuts $0.25
2 # 4 Washers $0.25
2 #2 Washers $0.25
3/32 Collar $0.70

Back to Motors